For many standard 3-cup Bodum cafetières, the replacement glass is a 0.35-litre (350ml) beaker, often sold under Bodum part number 1503-10. However, not every Bodum cafetière labelled “3 cup” uses the same glass. Check your exact model, its frame and the replacement’s dimensions before ordering—particularly if you own a New Chambord or a double-wall design.
What size glass does a 3-cup Bodum cafetière use?
The conventional Bodum 3-cup replacement beaker holds 350ml (0.35L). Specialist retailers list the standard glass at approximately 6.8cm in diameter and 13cm high. These are useful checks, but capacity and measurements alone do not prove compatibility.
| Item to check | Standard 3-cup replacement example |
|---|---|
| Nominal capacity | 0.35 litres / 350ml |
| Approximate diameter | 6.8cm |
| Approximate height | 13cm |
| Common glass beaker part number | 1503-10 (with spout) |
| Important exception | Some New Chambord and double-wall models |
These measurements refer to a specific standard Bodum spare beaker, not a universal 3-cup French press size. Always compare a seller’s model compatibility list.
How to identify the right replacement
- Identify the cafetière model. Check the packaging, order confirmation, original instruction leaflet or the maker’s markings. Bodum sells several ranges with different frames and constructions.
- Confirm the capacity. Bodum’s standard 3-cup beaker is 350ml. “Three cups” means small coffee servings, not three full-sized 250ml mugs.
- Measure the old glass if it is intact. Measure its outside width at the widest point (excluding any spout) and its height. Keep clear of cracked edges.
- Check for a spout and frame clearance. The shape must allow the glass to sit properly in the metal or plastic holder and the lid to close as designed.
- Verify the part number and exceptions. Compare the manufacturer’s spare-part listing or catalogue before purchase.
Does the standard 350ml glass fit every Bodum 3-cup model?
No. Retailers selling the 350ml Bodum replacement glass specifically note exceptions for the New Chambord and double-wall coffee makers. Even when a cafetière is advertised as 3-cup, its construction may require a different component or may not have a separately replaceable beaker.
Do not force a standard beaker into a tight frame, and don’t assume that glass with the correct volume will support the lid and plunger safely.
What’s the difference between 3-cup and 4-cup Bodum replacement glass?
Bodum’s spare-parts reference distinguishes a 3-cup, 0.35L beaker from a 4-cup, 0.5L beaker. A 500ml part is therefore not the usual replacement for a 350ml Bodum cafetière. The larger component can have different dimensions and may not sit in the existing frame.
If you find conflicting listings, prioritise the official Bodum model and part number over a seller’s generic “fits most French presses” description.
What if the original glass has broken?
Don’t try to reassemble or reuse a cracked beaker. Small glass fragments are hard to spot and cracks can worsen when hot water is added. Carefully remove and dispose of broken glass using appropriate protection, then check the plunger, metal filter and frame for trapped fragments or damage.
If you’ve lost the original measurements, search using your Bodum model name plus “3 cup spare glass”. A manufacturer’s matching parts list is more dependable than estimating from the empty frame.
Can you buy a cheaper third-party replacement?
Possibly, but check that the seller expressly lists your exact Bodum model as compatible. A third-party glass that happens to measure roughly 350ml may still have a different outer diameter, height, base shape or spout placement.
Look for borosilicate glass intended for hot drinks, stated dimensions, model-specific compatibility and a practical returns policy. Don’t treat “universal” as proof it fits.
Where to buy a 3-cup Bodum spare glass
Start by checking Bodum’s official spare-parts catalogue. You can also browse 3-cup Bodum replacement beakers on Amazon UK. Match the model, 350ml capacity, dimensions and stated part number on the individual listing before buying.
The Amazon link is a general shopping search, not an endorsement of any unverified replacement.
Frequently asked questions about which replacement glass fits a 3 cup bodum cafetière
How many millilitres is a 3-cup Bodum cafetière?
The standard three-cup Bodum French press is 350ml (0.35 litres). It is designed around smaller coffee servings rather than three full mugs.
Is Bodum 1503-10 a 3-cup replacement glass?
Yes. Bodum’s spare-parts guide identifies 1503-10 as a 0.35L, three-cup glass beaker with spout. Confirm it matches your specific cafetière version before ordering.
Will a 350ml glass fit my New Chambord?
Not necessarily. Some retailer compatibility information explicitly excludes the New Chambord from the standard 3-cup replacement. Check the exact model and matching spare part.
Can I replace only the glass and keep the old plunger?
Often, yes, on standard French presses with a removable beaker. The replacement must fit the frame and plunger assembly correctly. If the plunger or filter is damaged, replace the relevant compatible parts too.
Bottom line
Most standard 3-cup Bodum cafetières use a 350ml glass beaker, but not all 3-cup designs are interchangeable. Identify your model first, check approximately 6.8cm diameter and 13cm height for the common replacement, and verify the part number and exclusions before spending money. We hope this article has answered your question about which replacement glass fits a 3 cup bodum cafetière.
Sources and compatibility references
- Bodum UK official spare parts
- Bodum guide to spare beakers and filter parts (PDF)
- MaxiCoffee: 3-cup Bodum spare beaker specifications and exclusions
Disclosure: Progressive Housewares may earn a commission from qualifying purchases through affiliate links, at no additional cost to you.